After over 2 years of design, development and testing, Vaporfections’ miVape is finally available and it offers users, a pocket sized version of their flag-ship desktop vape, the viVape.
The miVape promises to be one of the most technologically advanced vaporizers on the market, with the cleanest and clearest vapor ever, thanks to it’s mostly all glass air path and true, convection heat. CLEAN TASTE, CLEAR CHOICE!
Features and Specifications
- Quartz crystal glass components: airway, heating system, heating chamber, herb/wax Cups and draw stem.
- Pocket sized, portable design
- Medical-grade materials
- True convection heating and conduction
- Compatible with dry herbs and concentrates
- Fully adjustable digital temperature control system (5°F increments)
- Temperature range: 250°F – 430°F
- OLED display
- Fast heat up: about a minute or less
- Rechargeable and user replaceable battery: custom lithium-ion polarized battery
- Great battery life
- Auto shut-off: set by user from 4-10 minutes
- Dimensions: 2.5 x 4 x 1.25 inches
- Weight: approx. 154 grams
- Unique spiral quartz crystal glass heat engine/air path
- Removable glass chambers ( Cups )
Design and Construction
After watching and waiting for the miVape for quite some time, I had high hopes for this device, given the amount of time it was in development and considering all of the delays.
I had expected and hoped for some metal in the design and body of the device but when I received mine on that fateful day, I was somewhat disappointed. First of all, no metal anywhere, besides the mouthpiece screen. Upon picking the miVape up for the first time, it felt more like a toy than a device I should be inhaling vapor through and a bit concerning at first. I don’t expect vaporizers to be 100% medical grade but most people switch from smoking for the health benefits and a lot vaper’s are medical users, so vaporizers should at least be built with this in mind and built to a higher standard. Even though the miVape is constructed with purity in mind and features lot of glass components, which is a great, pure and inert material, I worry about the rest of the device itself and what it’s made out of. I think the idea behind the miVape is great and this device is capable of producing very pure, clean vapor but I only wish that they had taken their design further and used higher quality materials in the body / mouthpiece in order to take advantage of the full capabilities of that glass convection heating system.
Sadly, the miVape is entirely plastic, excluding the quartz glass air path, glass Cups and glass draw stem. I understand that you can’t always use metal to build vaporizers for obvious heat reasons but it seems like Vaporfection could have used some in their design to make it feel more luxurious, reliable and less flimsy. A metal lid, metal sides and / or a metal battery door / latch would have done wonders to make this vape feel better. Companies have pulled off all plastic bodies before, like the Crafty and Mighty by Storz and Bickel, which are two amazing portable vaporizer’s and they still feel high quality and safe, not to mention the awesome vapor they produce. The plastic of the miVape isn’t overly solid either, it creeks and moving parts could easily break if your not careful, especially the lid and the battery door which are flimsy and loose. It also appears that some of the plastic is painted silver, which kind of worries me for obvious health reasons but at least most of the silver parts are on the outside of the device. Vaporizers don’t need to be bullet proof but they should be built with health in mind from quality, safe materials, after all, people will be inhaling heated vapors through them and I feel that Vaporfection could have done a better job constructing the miVape. The construction and materials of the miVape body is my #2 major negative of the device and it just seems like they should have built it slightly better, given all the fragile, sophisticated glass and special heat engine inside. However, I will say that after placing a battery in the unit, the miVape felt much better, it stiffened up a bit, it was less creaky and had a nicer feel and heft to it.
The very first miVape’s had a few issues from floppy lids, batteries that got stuck and temperatures that weren’t calibrated correctly, so they ran hot, about 100°F too hot. I think It’s important to mention the first miVapes because it shows that Vaporfection listens, that they stand behind their device and that they want to deliver a good product. As soon as Vaporfection got wind of the issues, they worked extremely hard to fix all the issues and eventually sent out replacement units. I have to give it to Vaporfection and especially Dan, for providing excellent customer service and for standing behind their product. I am a Vaporfection customer for life, even though I may not be 100% sold on the miVape. I Hate to be so critical towards the miVape but this is only my opinion and I am just trying to cover everything I can and as honestly as I can.
After awhile, the replacement miVapes arrived and I received mine directly from Vaporfection. I was expecting to see some major changes to the unit after reading about the upgrades in a newsletter sent out from Vaporfection but the replacements looked and felt the same, however, the new units were re-calibrated, so the temperatures are more accurate, they also supposedly beefed up the battery door and / or latch, cleaned up the battery compartment more for easier battery change out, changed the logo on the sides so the new ones are now recessed and they made the lid slightly stiffer and that was basically it. Also, the miVapes now come shrink wrapped and sealed for authenticity.
The heater design of the miVape is definitely special. It’s unique, unlike any other portable vaporizer, which mostly all feature metal or ceramic heaters but the miVape is the first portable to have a glass air heating system, combined with a mostly glass vapor / air path. You can compare this device’s heating system to the VapeExhale Cloud Evo and Vaporfection’s own, viVape desktop, which both feature all glass heating systems, except on a larger scale. Glass is what most people prefer when it comes to flavor and purity, so when I first got wind of the miVape and saw the design, I was blown away and I just couldn’t wait! Again, I love the idea behind the miVape, a portable vaporizer featuring a glass vapor / air path with a glass convection heating system and glass material Cups, so you can only imagine the purest, cleanest, fullest flavored vapor production, given how inert glass is, so it’s a flavor chasers dream rig but I felt like the execution / construction of the miVape missed the mark.
GLASS, GLASS AND MORE GLASS. Except for a few areas, the miVape features an all glass air and vapor path, minus a small section of Silicone where the air enters the glass tube, a small Silicone seal around the top of the glass chamber and a section in the mouthpiece that joins the glass Cup with the glass draw stem. The DaVinci Ascent was the first portable vaporizer with a glass vapor path but it utilizes a conduction ceramic heater, whereas the miV
ape uses “True Convection” and I will touch on this more in the Vaporization section. This glass heater works by pulling fresh air in through the bottom of the unit through some small holes around the USB Port, which then enter a short section of Silicone tube that connects to the glass heater area where this glass tube makes a spiral and ends at the glass chamber where the glass material Cup sits suspended inside. The actual heat is produced from a small metal coil that is wrapped around a section of the glass tube, just above the spiral and below the chamber. This coil heats the glass, which then heats the air as it passes through the heated glass tube and spiral, then into the chamber and finally heats the material in the glass Cup. The miVape offers “True Convection” heat but there is also some conduction heat going on as well and this can be confirmed by leaving a loaded Cup inside the heated unit without inhaling and after a while, the material will be partially vaporized. Conduction isn’t necessarily a bad thing but in this case, it makes it more difficult to get good, consistent results with dry herbs but on the other hand, it actually is a plus when using concentrates. I think the conduction happens as a by product of their convection heating design or perhaps they wanted the conduction as well but the glass Cup sits so close to the glass walls inside the chamber and so close to the metal coil heater, the glass Cup inevitably conducts heat via conduction in addition to the convection hot air you pull through the glass spiral. This extra heat centered mostly around the bottom of the Cup brings me to my #1 negative of the miVape, I simply have a hard time getting consistent, even heating and without charring or burning the material when I’m using dry herbs. I think if they enlarged the chamber, changed the design of the Cups and / or moved / re-designed the coil, would potentially solve the issue of uneven heat and make a huge difference but as it is now, you can still get good results if you do things a certain way.
-Chamber / Mouthpiece
The miVape features a removable material chamber or Cup. These Cups are Quartz glass like the rest of the glass components and they can be used with dry herbs or concentrates, either by using the included wax cloths or on their own, if they are a drier consistency so it won’t drip through the holes and into the chamber / heater. These Cups feature 3 holes in the bottom for the air flow but when you look at them, its hard to believe that they designed these Cups with convection heat in mind, given that the holes are so small and theres on 3 of them, so how much convection heat is really happening? These 3 small holes can also allow debris to fall through into the chamber, so that’s something to be aware of and check for after a session so they don’t build up or fall into the heater where it could potentially restrict the draw even more and cause the vapor to taste off. The Quartz Cups have a rim that is there to hold them in place on the mouthpiece assembly, where they slide onto a track and kind of snap into place when they are positioned directly below the Stainless Steel screen of this mouthpiece assembly. I have noticed that its not a perfect seal where the glass rim meets the plastic, so some extra fresh air is being pulled in from that area, in addition to the holes in the Cup where the hot air enters, which makes me wonder if the device would work better if it was a tighter seal so more hot air could be pulled through instead of cold air from the outside that doesn’t aid in the vaporization process. Each pair of Cups also come with Silicone Caps that securely seal these Cups, so you can pre-pack them for on the go convenience and they also come with Silicone Safety Cups for cool handling of the Cups when they are still hot. I enjoy using the Cups but I wish they featured a flat bottom with an option for a screen, so it could potentially help the air-flow and convection heat, as well as keep the chamber cleaner. I would also like to see a Cup with Holes located half way up, on the sides or something, so you could use concentrates without having to worry about them dripping through the bottom but luckily I haven’t had an issue with this yet.
The actual mouthpiece assembly is another story entirely and brings me to my #3 negative of the miVape, you cannot take this piece apart to clean it and you can’t get it fully clean without taking it apart! This mouthpiece just doesn’t make much sense, given that Vaporfection was going for an all glass design, so they tossed in this plastic nightmare, which basically defeats the purpose of the glass system but at least the glass is used in most of the important places. I’m not so concerned that this piece is made out of plastic but that it cannot be broken down for cleaning, except for removing the screen which does little to help in this process. Although, I do like how the mouthpiece works with the rotating draw stem, which is really nice and I like using it, it’s very comfortable and it never gets hot but when if comes time for cleaning, it’s pretty much impossible to get it completely clean because of all the nooks and crannies for residue to hide and build, as well as the fact that if you try soaking it in alcohol for any period, you risk the orange paint washing off and the black plastic turning white. The “Clean Taste, Clear Choice,” just goes down the drain when you can’t properly clean a mouthpiece, so no matter how capable the miVape is at producing pure, clean vapor, it just gets mucked up when you have a dirty mouthpiece, which is the main piece that will get dirty! At nearly $20 each for a replacement mouthpiece, it just doesn’t make sense to buy one every time they get dirty so you just have to work at it if you want to get it clean again and its not easy.
There is a rumor of an all glass mouthpiece in the works and if so that will be huge! I will keep this review updated, if and when the new mouthpiece happens!
This vaporizer has really good battery life, along with the ability to change / replace the battery, means you always have plenty of power to spare and you have the option to bring back-ups for extended outings. The miVape uses a custom Li-Ion battery with a capacity of 3100mAh. Spare batteries are not particularly cheap though, at $39.99 they set you back a little but its not terribly unreasonable and its always nice to have spares, plus all batteries eventually loose capacity, so even having the option to replace a battery is a huge plus and I think EVERY PORTABLE VAPORIZER SHOULD HAVE A REPLACEABLE BATTERY! On average, I am able to get between 8-12 sessions at 350°F, lasting 6 minutes each which is really good in my book however, you can’t use the device while its charging.
Charging the miVape is easy as plugging it in and you will see the LCD turn on, showing “Charging” and the current charge percentage. The USB cable can be a little difficult to push into the charging port of the miVape, so you just have to make sure its in far enough. Sometimes during charging, my unit likes to get stuck on 80% or 90%, and then it stays there for a lot longer, then eventually it reaches the “Fully Charged” status. I would like to see a charging dock so you can have the option to charge your spares instead of having to put them into the device each time.
Also, the battery can be tricky to get in and out, so it usually requires a slight bump on the bottom to get it started and coming out so I can pull it the rest of the way but there is a
spring inside the battery compartment that helps.
The battery latch and door are a bit flimsy and I wonder how long it will last with repeated use but so far no problems. This is an area I would have really liked to see some metal used in place of the plastic for strength and reliability, after all, this mechanism is something that will be used often by most and without it, the miVape will be useless unless you fashion a way to hold the battery in place. One other note, the knob that you slide to open / lock this door, slightly protrudes out, so the unit is a little wobbly when standing up and I’ve tipped it over repeatedly but luckily I haven’t broken anything.
-Operation / Usage
The miVape is easy to operate but it’s not always easy to get good results, that’s the catch…. Basically just fill your Cup, LOOSELY with dry, medium to finely ground herb, no more than 3/4 full, slide the Cup into the mouthpiece assembly, line up the orange arrows and gently push it into place until the latch locks it into place. Turn the miVape on and set your temperature and I recommend starting at 340F, wait for it to get to temp and about a minute after it reaches your desired temperature, you should get visible vapor but you will definitely get some great taste before you see any vapor. I will sometimes turn mine down after a few minutes because it does get hotter after a while, so give it a little time before turning it up more. This vape defiantly heats up quickly but it takes a little while longer after the temperature has been reached to start producing visible vapor, in part because I think it takes a little while for all the glass to reach the same temperature as the coil for the convection heat. I have seem some people who wait for their unit to reach their set temperature before placing the glass Cup / mouthpiece assembly into the miVape but I have found that you get vapor faster by leaving the glass Cup inside the unit while it heats up.
It can be a little difficult to push the Cup and mouthpiece assembly into the miVape body because there is a Silicone seal that surrounds the Cup around the rim of the chamber, so I found that it works best to always have the release / lock button pressed when loading and removing this assembly piece. Just line up the orange arrows and that’s really it, it can’t go in the other direction. The release button could be better, it sticks at times and the locking tab doesn’t always fully retract, so if you can’t pull the mouthpiece assembly out smoothly, so make sure the locking tab is fully retracted and you shouldn’t have too much of a problem. Also, the lid can easily break! Use caution when opening and closing the lid and be aware of it as you load the device.
The miVape features and both Celsius and Fahrenheit, which can be selected by pressing the power button once while the unit is on and to change it, just hit either the “Plus” or “Minus” buttons to make your selection. The OLED screen shows your set temperature but it would have been nice if it showed the actual temperature as well because I feel like it changes during the session and gets hotter, although I don’t think that the miVape actually measures the temperature at all, I think it’s calibrated during production to reach a certain level based on your selection. Every time you start the miVape, it starts at 0°F then jumps to 42°F and then slowly climbs to your set temperature and after that, its never changes. Compare that to the Crafty and Mighty vaporizers that actually measure / regulate the temperature during the entire session, so when you start either device, the device / temperature starts out at whatever the outside temperature is, so if it’s 80°F outside then the Crafty or Mighty will start at 80°F and climb until it reaches your set temperature. From there, both of those units regulate the temperature to stay within a small given range of the set temperature and adjusts itself depending on the outside temperature, your draw speed and duration etc. I guess it doesn’t really matter that the miVape may not measure the actual temperature, as long as your getting good results but vaporizing is a dependent on a lot of things and these devices are capable of producing many different results and effects based on specific temperatures, so I prefer to know exactly what temperature I am vaping at, that way I can repeat the exact same results next time.
The miVape also features and adjustable shut-off timer from 2-10 minutes that can be changed by pressing the power button once more after the Celsius and Fahrenheit screen and it takes you to the shut-off timer, where you can use the “Plus” or “Minus” again to select your time. I prefer the 6 minute shut off time and I found like that was usually enough time to fully vapotize a Cup. I would also prefer to see the actual shut-off timer indicated on the screen at all times, that way you know how much longer you have, instead of the last 10 seconds of the session, when the units counts down before shutting off but you can at least hit the power button to cancel the shut-off and keep going if you want.
When your done with your session, just hold the power button to shut off the miVape. I found that the Cups are easy to maintain and keep clean if you brush them out quickly while they are still warm by using the Silicone Safety Cups.
-Vaporization / Vapor Quality
Vaporizing Dry Herbs:
Vaporfections’ miVape is capable of producing some of the tastiest, purest vapor ever out of any portable available but it can also easily char your material and taste really awful if your not careful and don’t experiment around to find out what works best for you. My first session with the miVape was bad, it was way too hot (first version miVape with hot temperature issues BTW) and I had uneven heating with burnt pieces on the bottom and fresh material on the top of the Cup and it tasted awful. After that experience, I realized that the first miVape’s temperatures were off so I lowered it proportionally to Vaporfections instructions, using a temperature conversion chart they provided to get a more accurate temperature and then I started getting better results but I also quickly learned that the miVape needs things a certain way, in order to bring out it’s full potential and I think most people, especially those inexperienced with vaporizers, will find it somewhat disappointing and difficult to get good results out of the box
Even though the miVape features a full range of temperatures at 5°F increments, there is really just a small window that produces the best visible vapor without burning or overheating dry herbs, at least in my experience. The sweet spot for the best taste with the most visible vapor without overheating is between 325°F and 350°F but it varies on personal preference, the herbs moisture content, amount, grind size etc. Typically, I find the vapor to be the best around 340°F, which is a lower temperature than I use on any of my vapes but even at that temperature, I have experienced especially dark ABV (already been vaped) near the bottom of the Cup, especially if you let the herb sit a while or if you pack in too much, so it doesn’t have room to move around during inhalation. I found that long, slow inhalations work best, the slower and the longer, the better. You don’t want to inhale so hard that all the herb gets sucked up on the top screen and stays there, so you won’t get the full vapor but you don’t want to inhale too lightly, or the herb won’t move around enough and the hot air can’t flow through, which results in overheated herb on the bottom and under heated herb on the top, so there is a fine line in my experience. I also try to inhale frequently, so the herb doesn’t have an opportunity to sit too long on the hot bottom of the Cup, which will eventually over heat the herb and even if you don’t inhale at all during your session, you will find that your herb will still be partly, if not mostly vaporized, thanks to all the extra conduction this unit produces. The miVape needs more and better convection and less conduction!
When the vapor is flowing and the results are good, then the vapor is really great, the flavor is fantastic, the vapor is smooth, cool and pleasant. I’ve experienced some of the best tasting vapor through this device using the smallest amounts of herb, which is quite amazing abd you will be surprised how many clouds the miVape will pull out of a tiny pinch of herb! I have noticed that the flavor can be excellent but it may not always be as full or potent as other vaporizers, like the Crafty or Grasshopper but the flavor lasts longer with the miVape. Those other vaporizers seem give you most of the flavor in the first few inhalations, then tampers off, so it’s give and take, either you get less full flavor for a lot longer or you get the fullest flavor for a short while and that’s one reason why the miVape has a place in my vaporizer line up.
Even when I think I’ve got a good session going and I can’t taste any over heating, sometimes it comes later in the session and then you can tell it’s overheating slightly because the vapor changes, the taste changes and it gets a little “scratchy” on my throat and then I know to turn the unit down or inhale in a different way, otherwise when you pull out that Cup you will see a dark bottom! I found I get great, amazing results with one herb and poor results with another, using the exact same amount, grind size, temperature, inhalation method/duration etc. so I think the vapor quality has a lot to do with the herbs moisture content but I never really know what to expect. If I could repeat good results across the board, then that would be a different story and I could recommend this vaporizer to more people but the consistency isn’t there, at least not for me.
If your getting over heating / uneven heating and don’t want to turn the unit down, you can also try a few things. For instance, try placing something in the bottom of the cup to raise the herb a few mm up and away from the extreme heated Cup bottom, like a screen that’s balled up ( see photo ) or the wax cloths also work and then you can get away with the higher temperatures because your getting more of the convection heat and less of the conduction. Part of the reason why small amounts work better IMO, is that when you inhale the herbs are pulled off the bottom of the Cup and away from the extreme conduction heat so then just the hot air is mostly heating your herb.
Tip/Tricks: If your experiencing uneven heating or black/charring of the material near the
bottom of the cup, there are a few things to try: First and most importantly, do not overfill the cup. Make sure there is some room near the top of the cup for air and for the herb to move around, no more than 3/4 full of medium to fine grind seems to work best for me. Make sure your
temperature is not too hot, I prefer 325F-350F and sometimes I turn it down when I get a few minutes into the session. Take long, slow, steady inhalations, 8 seconds is a good amount to try and go from there. If your still getting blackness near the bottom of the cup, try pulling the cup/mouthpiece assembly out of the fully locked down position and bring the cup / mouthpiece assembly up a little, just enough so that the area that is normally locked with the silver tab is even/ flush with the silver area where the lock button is locked (See photo). With these tips, I get great results and great taste, even heating and nice visible vapor without black bits.
Vaporizing concentrates with the miVape is quite amazing on the other hand and it’s easy too. Where the miVape doesn’t always nail it with the dry herbs, it makes up for it in vaporizing concentrates, of all consistencies! I think the miVape does concentrates better than any other portable vaporizer but I think the Haze V3 produces more vapor from concentrate’s but the flavor is better with the miVape. The added conduction and extra hot convection heat on the bottom of the Quartz Cups that can cause charring and uneven heating with herbs, is extremely beneficial when vaping concentrates that need that extra heat for really good vapor production. I have experimented around with oil and waxy consistencies using the wax cloths and it was amazing! Great flavor, great visible vapor and it packed a punch, although I do wish there was a better way for the runnier concentrates than the cloths that require a fresh one each time for best results but overall, I was quite impressed. Drier concentrates are amazing and they can just sit in the bottom of the cup without anything extra where they can bubble away and just a nooky at a time will produce amazing results. You can also mix herb and concentrates together to get some really great results and sometimes it actually helps because the concentrates soak into the herb, preventing them from overheating, so your left with just amazing flavor and great, evenly vaporized ABV. I would be careful with some concentrates that could potentially drip through the holes and into the chamber/glass spiral but if you use small amounts and your careful, you shouldn’t have a problem. If nothing more, the miVape is worth buying for concentrates alone!
The only other thing I will mention regarding vaporization and vapor quality, is that the miVape has a somewhat restricted draw. It definitely requires a little lung to inhale but it’s not a deal breaker and it’s not nearly as restricted as some other vaporizers I have owned such as the MiniVap (may have been a faulty unit?) or any Atmos Pen. I have found that some Cups have less resistance than others and sometimes it depends on how you turn the Cup in the track of the mouthpiece assembly or if you have it pushed all the way back into position or not.
Cleaning / Maintenance
Overall, the miVape body stays perfectly clean as long as you are careful and check the chamber once and a while for any debris that may have fallen through the holes of the Cup. Just a quick dry brush for the chamber is as far as I have ever needed to take it with the body of the miVape.
The Quartz Cups clean up like a breeze with a quick soak in ISO and they will be brand new again and again and you can buy plenty of spares to have on hand, so you’ll never be without a clean Cup and the come in packs of 2 for $15.99 with the Silicone Lid but the Silicone Safety Cups are separate at 2 for $2.99 . If you brush the Cups out while they are still warm, then you won’t need to soak them for quite awhile and they will stay pretty clean.
The mouthpiece assembly, the part that connects the Cup and draw stem is a whole other story, a sad and frustrating tale of misery and confusion. As you have read, this is one of my biggest negatives of the miVape design and I really wish they allowed for users to be able to break down and take this assembly apart for cleaning because it’s damn near impossible to get it all clean. If you soak the mouthpiece assembly in ISO like the user guide shows, you risk having the orange paint wash off and the black plastic turning white-ish. All glass is great for taste but it really doesn’t matter when you can’t fully clean your mouthpiece assembly, so there will likely be a lingering taste added to the pure vapor flavors, so I hope they re-design that piece for easy cleaning.
I recommend soaking the assembly briefly and scrubbing it with pipe cleaners and repeating the process of soaking briefly and scrubbing instead of leaving it in ISO for a long period of time, which is more likely to get it cleaner but also more likely to cause discoloration of the plastic. Soaking is the only possibly chance to get it clean after a while of vaping and you really have to work some pipe cleaners in and around, to try and bend your way into all of the different chambers and crevasses of the assembly and there are a lot of areas that are hard to get to or impossible. Its a bit of a pain but you can get it fairly clean if your patient and persistent.
- Mostly all glass air and vapor path
- Features convection heat
- Replaceable battery
- Removable chamber: Quartz glass Cups ( great for on the go and you can pre-pack them for convenience )
- Great battery life ( 8-12 sessions, 6 minutes each at 350F )
- Pure, clean taste
- Fantastic with concentrates of all consistencies
- Rotatable draw stem for comfortable vaping
- Very small and portable
- Can be very efficient: works best with small amount of material
- Great customer service from Vaporfection
- Wide range of temperatures with custom shut-off timer
- Fast heat up
- #1 negative: Convection heating system combined with secondary conduction heat can cause inconsistent results, overheating, uneven heating, charring and burning at times.
- #2 negative: Cheap-ish feel, all plastic construction, painted pieces
- #3 Major negative: Very difficult / near impossible to clean the mouthpiece assembly entirely
- Somewhat restricted draw
- Herb cups only support small amount of materials
- Relatively long charge times. Tends to get stuck on 80-90%
- Cannot be used while charging
Overall, I love the design and idea behind the miVape: A portable vaporizer with glass components, combined with pure convection heat, features a replaceable battery along with the ability to vaporize both dry materials and concentrates. It sounds like a dream vaporizer and it has those features and vaporizes dry materials and concentrates. However, the miVape doesn’t quite fully live up to the dream with inconsistent results, uneven heating and a disappointing build quality that feels like a toy. The miVape is a diamond in the rough and it just needs to be polished and refined to really shine!
Even though there is room for improvement, the potential is there, the idea is there, it just needs some upgrades. The miVape has a place in my vape collection and I do pull it out once and awhile when I’m in the mood for concentrates or just want to taste a pinch of herb but it just doesn’t have the chops, yet, to keep it on the top shelf. I hope Vaporfection will work on the miVape, give it some love and release the miVape 2 that takes advantage of what glass can truly offer. I would not recommend this vaporizer to everyone, just those who have some experience with vaporizers and who like to fool around to get the results its capable of, otherwise I think most people may find it too difficult and particular to get great vapor by just tossing in some herb.
#1: Improve or re-design the glass heating system so it features more convection heat and less conduction.
#2: Build it better with higher quality materials, maybe use some metal.
#3: Update that mouthpiece! Please, we need to be able to clean this piece! Glass anyone?
If they change all or any of those issues, then the miVape could become a dream vape!